APPLICATIONS
B&P mills are used in the food industry for
processing fruits and vegetables. These systems are used to grind
the product to mash. Bearing in mind the subsequent pressing stage,
the desired grain size is approx. 5-8 mm, which can be achieved
using the solutions described below.
GRATING
MILL
The
mill consists of a housing in which the shaft of the main frame and
the motor is fitted. The feed screw and the rotor are installed on
the shaft, while inside the housing there is a set of grinding
blades. The mill is driven by an electrical motor which is coupled
to the shaft via an articulated coupling. The outlet funnel is
installed in the bottom section of the housing. The complete unit
is supported by a steel frame.
|
|
BRM 20
|
BRM 30
|
|
Efficiency
|
20 t/h
|
30 t/h
|
|
Power input
|
11 kW
|
18 kW
|
|
Material
|
AISI 304
|
AISI 304
|
HAMMER
MILL
This
system is designed to produce mash from vegetables and stone-free
fruits. The raw material is fed into the mill via a loading chute
and ground by a beater shaft. The mash is discharged by being
pressed through a perforated plate, which is very easy to
replace.
|
|
BMH 10
|
BMH 15
|
|
Efficiency
|
10-12 t/h
|
15-18 t/h
|
|
Power input
|
11 kW
|
18,5
kW
|
|
Material
|
AISI 304
|
AISI 304
|
CENTRIFUGAL
MILL
This
system is optimal for grinding stone fruits. The ground material is
hurled by a multiple-blade rotor in the mill cylinder against a
blade-like perforated stainless steel sheet. The mash is discharged
via a sieve opening. The tiller blades are available with various
toothing sets.
|
|
BSM 10
|
BSM 14
|
BSM 15
|
|
Efficiency
|
5-7 t/h
|
14 t/h
|
15 t/h
|
|
Power input
|
5,5 kW
|
11 kW
|
15 kW
|
|
Tiller blades
|
9
|
15
|
15
|
|
Material
|
AISI 304
|
AISI 304
|
AISI 304
|
CRUSHING
MILL
This
mill is perfect for mashing berry and stone fruits such as
cherries.
It
consists of two stainless steel rollers mounted on a frame, with
the rollers being driven by a gear motor. The distance
between the rollers is adjusted manually, allowing for the crushing
of stone fruits (e.g. cherries or plums) without damaging the
stones.
|
|
BQM 10
|
|
Efficiency
|
up to 30 t/h
|
|
Power input
|
1,5 kW
|
|
Material
|
AISI 304
|
ADVANTAGES
• Robust, low maintenance
• Simple and very effective
process
• Quick and easy to clean
• Convenient maintenance
